|
| The In-Line Pitotless Nozzle |
 |
- Perfect for measuring flow-rates where job conditions do not allow water discharge such as stairwells or rooftops.
- The versatility of the Inline Pitotless Nozzle allows for accurate flow-rate readings when discharging into a closed-loop system, a drain, a hose, or open atmosphere.
- Use three interchangeable Pitotless Nozzles to measure as low as 90 GPM up to 1400 GPM.
|
|
| The BigBoy Hose Monster |
 |
- Perfect for Fire Flow Testing of Hydrants or Water Main Flushing
- Read your GPM flow-rate directly on the gauge face while flowing
- Uses the patented Pitotless Nozzle so you’ll never have to change out a pitot because it got hit by a rock.
- Weighs only 13 pounds yet handles high flow hydrants up to 2,700 GPM.
- Flow from your hydrant pumper port – 4”, 4-½”, or 5” Storz.
|
|
| 2011 Product Catalog |
 |
| Check out our new Catalog. It includes product information, overview of applications, technical information, FAQ's and a glossary. Contact us to send you a free copy or click here to download the PDF. |
|
| Dechlorination Calculator |
| Planning to dechlorinate? Our dechlorination calculator approximates costs to dechlorinate using Vita-d-chlor, VC Mini-tabs, Bio-neutralizer and Bio-Max. |
|
|
| PSI and BAR dual scale gauges available at no extra cost |
Our dual scale gauges offer the same quality and reliability as all our gauges. 1/2" NPT, 1/2 degree accuracy rated. The outer PSI scale reads in red, BAR in green.
- 0 - 100PSI (6.9BAR)
- 0 - 160PSI (10.9BAR)
|
 |
|
| 45 degree Test Header Elbow |
| Our new 2 ½” 45 degree elbow can help get your hose pointed in the right direction. The elbow is chrome plated stainless steel with 200 PSI rating. Comes 2 ½” female swivel NH by 2 ½” male NH. Add this fitting to the hose valve to minimize kinks and bends in the hose. |
 |
|
| Protective Gauge Boots for 4" and 2 1/2" diameter gauges |
| Help protect your gauges against shock, impacts and corrosion. Boots are sold separately from gauge. Easily installed by hand. |
 |
|
| Stream Shaper |
| Are your hoses wearing out a few inches from the inlet? Make them last longer. Stream shapers will minimize hose burn and arrest debris. |
 |
|
| Dechlorinate with Bio-neutralizer |
| Least expensive Dechlorinating agent available. Safe to humans and aquatic life. Sodium sulfite tablets 2 5/8" x 13/16" x 140g (5 oz.) |
|
|
| Fire Flow Test Kit |
| Just add a hose and you are ready to perform a hydrant flow test. We specially cut the padding ou our CASE 720 to fit all the needed equipment ready to ship. The fire Flow Test Kit includes the following: |
- Little Hose Monster (HML)
- 2" Pitotless Nozzle (PN2)
- 2.5" Hydrant Gate Valve (HGV25)
- 0-100 PSI Gauge 4" Dial (GK100D4)
- 0-160 PSI Gauge 4" Dial (GK160D4)
- 12' Remote Reader (HMRR12)
- Swivel Gauge Cap (GCS)
- Spanner Wrench (WSPA101)
- Hydrant Wrench (HW107)
- Case 24" x 16" x 10" (CASE920)
|
 |
|
- Smaller
- Lighter
- Pitotless
|
Click here for more information on the Little Hose Monster |
| The Little Hose Monster Stabilizer has two applications. It is used in pump testing when stacking the Little Hose Monsters to prevent from tipping over. It is also used in flow test situations where the Little Hose Monster by itself needs to be anchored, such as on inclines or when hose cannot be straight. |
|
| The Pitotless Nozzle™ |
- No More Pitot Replacements
- Read flows from 48 GPM to 1607 GPM
- Four sizes - 1", 1 1/8", 1 3/4", 2"
Click here for more information on Pitotless Nozzle information |
|
|
| CASE920 |
| Perforated padding allows for customizing the content configurations to accommodate multiple gauges or other accessories. It is big enough to carry the Little Hose Monster and small enough for checked baggage. We use this case in our Flow Test Kit.
Features:
- Oversized hinges
- Molded-in padlock holes
- Automatic pressure purge system
- Includes multilayer protective cubed matrix Accuform Foam
- Molded-in padlock holes (fits standard size Masterlocks®)
- Neoprene O-Ring seal makes the case watertight, airtight and dustproof
|
|
